Curing-light attenuation and depth of cure of composite resins
DOI:
https://doi.org/10.7308/aodontol/2013.49.1.02Keywords:
Composite resins, PolymerizationAbstract
Aim: To evaluate the attenuation of curing- light across different thicknesses of composite resins and their depth of cure.
Materials and Methods: The materials used included A3 Opallis and Llis with enamel (E) and dentin (D) shades. The curing- light attenuation used circular brass molds (6.0 mm in diameter and 0.5, 1.0, 1.5 and 2.0 mm in thickness), which were positioned on the radiometer. The light intensity was measured before and after the placement of the material. The depth of cure was measured according to proceedings described in ISO 4049 (2000). The data were submitted to ANOVA and Tukey´s test (5%).
Results: The results showed that the Opallis and Llis resins presented statistically significant differences at all thicknesses. Upon comparing the materials, at 0.5 mm, a statistically significant difference could be identified between Opallis E and D, as well as between Llis E and D. At 1.0 mm, no statistically significant difference could be observed between Opallis E and Llis E, nor between Opallis D and Llis D; at 1.5 mm, only Opallis D and Llis D presented no statistically significant difference. At 2.0 mm a statistically significant difference could be observed between Opallis E and Llis E. No statistically significant difference in the depth of cure could be found between Opallis E and Llis E, nor between Opallis D and Llis D.
Conclusion: Greater attenuation of light values were obtained with dentin resins as compared to enamel resins, as well as in higher thicknesses of composite resins. Dentin composite resins showed a lower depth of cure than did enamel composite resins.
Downloads
References
Nahsan FPS, Mondelli RFL, Franco EB, Naufel FS, Ueda JK, Schmitt VL, et al. Clinical strategies for esthetic excellence in anterior tooth restorations: understanding color and composite resin selection. J Appl Oral Sci. 2012; 20: 151-6.
Nomoto R, McCabe JF, Nitta K, Hirano S. Relative efficiency of radiation sources for photopolymerization. Odontology. 2009; 97: 109-14.
Howard B, Wilson ND, Newman SM, Pfeifer CS, Stansbury JW. Relationships between conversion, temperature and optical properties during composite photopolymerization. Acta Biomater. 2010; 6: 2053-9.
Schattenberg A, Lichtenberg D, Stender E, Willershausen B, Ernst CP. Minimal exposure time of different LED-curing devices. Dent Mater. 2008; 24: 1043-9.
Rencz A, Hickel R, Ilie N. Curing efficiency of modern LED units. Clin Oral Investig. 2012; 16: 173-9.
Obici AC, Sinhoreti MAC, Frollini E, Correr Sobrinho L, Goes MF, Henriques GEP. Monomer conversion at different dental composite depths using six light-curing methods. Polym Test. 2006; 25: 282-8.
Guiraldo RD, Consani S, Consani RLX, Berger SB, Mendes WB, Sinhoreti MAC, et al. Comparison of silorane and methacrylate-based composite resins on the curing light transmission. Braz Dent J. 2010; 21: 538-42.
Camargo EJ, Moreschi E, Baseggio W, Cury JA, Pascotto RC. Composite depth of cure using four polymerization techniques. J Appl Oral Sci. 2009; 17: 446-50.
Moore BK, Platt JA, Borges G, Chu T-MG, Katsilieri I. Depth of cure of dental resin composites: ISO 4049 depth and microhardness of types of materials and shades. Oper Dent. 2008; 33: 408-12.
Ribeiro BCI, Boaventura JMC, Brito-Gonçalves J, Rastelli ANS, Bagnato VS, Saad JRC. Degree of conversion of nanofilled and mycrohybrid composite resins photo-activated by different generations of LDEs. J Appl Oral Sci. 2012; 20: 212-17.
Leprince JG, Leveque P, Nysten B, Gallez B, Devaux J, Leloup G. New insight into the “depth of cure” of dimethacrylate-based dental composites. Dent Mater. 2012; 28: 512-20.
International Organization for Standardization. ISO 4049. Dentistry – Polymer-based filling, restorative and luting materials. 3nd ed. Switzerland; 2000.
Arikawa H, Kanie T, Fujii K, Takahashi H, Ban S. Effect of inhomogeneity of light from light curing units on the surface hardness of composite resin. Dent Mater J. 2008; 27: 21-8.
Mousavinasab SM, Meyers I. Curing efficacy of light emitting diodes of dental curing units. Dent Res Dent Clin Dent Prospects. 2009; 3: 11-6.
Musanje L, Darvell BW. Curing-light attenuation in filled-resin restorative materials. Dent Mater. 2006; 22: 804-17.
Guiraldo RD, Consani S, Consani RLX, Berger SB, Mende WB, Sinhoreti MAC. Light energy transmission through composite influenced by material shades. Bull Tokyo Dent Coll. 2009; 50: 183-90.
Dos Santos GB, Monte Alto RV, Sampaio Filho HR, da Silva EM, Fellows CE. Light transmission in dental resin composites. Dent Mater. 2008; 24: 571-6.
Ganglianone LA, Lima AF, Araújo LSN, Cavalcanti AN, Marchi GM. Influence of different shades and LED irradiance on the degree of conversion of composite resins. Braz Oral Res. 2012; 26: 165-9.
Fróes-Salgado NRG, Pfeifer CSC, Francci CE, Kawano Y. Influence of photoactivation protocol and light guide distance on conversion and microleakage of composite restorations. Oper Dent. 2009; 34: 408-14.
Rode KM, Kawano Y, Turbino ML. Evaluation of curing light distance on resin composite microhardness and polymerization. Oper Dent. 2007; 32: 571-8.
Roberts HW, Vandewalle KS, Berzins DW, Charlton DG. Accuracy of LED and halogen radiometers using different light sources. J Esthet Restor Dent. 2006; 18: 214-24.
Price RB, Labrie D, Kazmi S, Fahey J, Felix CM. Intra- and inter-brand accuracy of four dental radiometers. Clin Oral Investig. 2012; 16: 707-17.
Hedge V, Jadhav S, Aher GB. A clinical survey of the output intensity of 200 light curing units in dental offices across Maharashtra. J Conserv Dent. 2009; 12: 105-8.
Kilinc E, Antonson SA, Hardigan PC, Kesercioglu A. The effect of ceramic restoration shade and thickness on the polymerization of light- and dual-cure resin cements. Oper Dent. 2011; 36: 661-9.
Hong SO, Oh Y, Min JB, Kim JW, Lee BN, Hwang YC, et al. Power density of various light curing units through resin inlays with modified layer thickness. Restor Dent Endod. 2012; 37: 130-5.
Flury S, Lussi A, Hickel R, Ilie N. Light curing through glass ceramics with a second- and a third- generation LED curing unit: effect of curing mode on the degree of conversion of dual-curing resin cements. Clin Oral Investig. No prelo 2013.
Al Shaafi MM, Maawadh AM, Al Qahtani MQ. Evaluation of light intensity output of QTH and LED curing devices in various Governmental Health Institutions. Oper Dent. 2011; 36: 356-61.
Floyd CJE, Dickens SH. Network structure of Bis-GMA- and UDMA-based resin systems. Dent Mater. 2006; 22: 1143-9.
Ribeiro BCI, Boaventura JMC, Brito-Gonçalves J, Rastelli ANS, Bagnato VS, Saad JRC. Degree of conversion of nanofilled and microhybrid composite resins photo-activated by different generations of LEDs. J Appl Oral Sci. 2012; 20: 212-7.
Leprince JG, Hadis M, Shortall AC, Ferracane JL, Devaux J, Leloup G, et al. Photoinitiator type and applicability of exposure reciprocity law in filled and unfilled photoactive resins. Dent Mater. 2011; 27: 157-64.
Arimoto A, Nakajima M, Hosaka K, Nishimura K, Ikeda M, Foxton RM, et al. Translucency, opalescence and light transmission characteristics of light-cured resin composites. Dent Mater. 2010; 26: 1090-7.
Lee YK. Influence of filler on the difference between the transmitted and reflected colors of experimental resin composites. Dent Mater. 2010; 24: 1243-7.
Yu B, Lim HN, Lee YK. Influence of nano- and micro-filler proportions on the optical property stability of experimental dental resin composites. Mater Des. 2010; 31: 4719-24.