Índice de fratura de instrumentos manuais de aço inoxidável e rotatórios de NiTi em clínica de pósgraduação em Endodontia

Autores

  • Warley Luciano Fonseca Tavares Cirurgião-dentista
  • Cristina Dorella Paulino Soutto Mayor Cirurgiã-dentista
  • Gabriela de Souza Gonçalves Cirurgiã-dentista
  • Ana Cecília Diniz Viana Universidade Federal de Minas Gerais
  • Luiz Carlos Feitosa Henriques Universidade Federal de Minas Gerais

DOI:

https://doi.org/10.7308/aodontol/2015.51.3.05

Palavras-chave:

Endodontia, Fratura, Instrumentação

Resumo

Objetivo: Realizar um estudo retrospectivo sobre o índice de fraturas de instrumentos manuais de aço inoxidável e rotatórios de níquel-titânio em tratamentos endodônticos realizados por alunos de um curso de especialização em Endodontia, relacionando a fratura dos instrumentos à fase de instrumentação dos canais.

Material e Métodos: Foram analisados prontuários de pacientes atendidos por estudantes dos cursos de pós-graduação em Endodontia do Instituto de Estudos da Saúde (IES) em Belo Horizonte, Brasil, entre maio de 2010 a novembro de 2012. Os prontuários continham um formulário específico para coleta de dados referentes à fratura de instrumentos. As radiografias foram analisadas em negatoscópio sob magnificação por dois examinadores previamente calibrados.

Resultados: Dos 501 prontuários analisados, houve 18 casos de fratura de instrumentos. Destes, 10 (55,55%) foram de fraturas de instrumentos rotatórios de NiTi e 8 (44,44%) de instrumentos manuais. Dos 8 instrumentos manuais fraturados, 7 sofreram fratura na fase de exploração inicial. Em apenas um instrumento observou-se fratura na fase de formatação manual dos canais.

Conclusão: Para ambos os tipos de instrumento foram verificados baixos índices de fraturas, os quais foram influenciados pela fase de instrumentação dos canais. Os instrumentos rotatórios de NiTi apresentaram maior índice de fratura quando comparados aos instrumentos manuais de aço inoxidável na fase de formatação dos canais.

Downloads

Não há dados estatísticos.

Referências

Roane JB, Sabala CL, Duncanson MG. The “Balanced force” concept for instrumentation of curved canals. J Endod. 1965; 11:203-11.

Sotokawa T. An analysis of clinical breakage of root canal instruments. J Endod. 1988; 14(2):75- 82.

Thompson SA. An overview of nickel-titanium alloys used in dentistry. Int Endod J. 2000; 33(4):297-310.

Sattapan B, Nervo GJ, Palamara JEA, Messer HH. Defects in rotary nickel-titanium files after clinical use. J Endod. 2000; 26(3):161-5.

Bahia MGA, Buono VTL. Decrease in fatigue resistance of nickel-titanium rotary instruments after clinical use in curved root canals. Oral Surg, Oral Med, Oral Pathol, Oral Radiol Endod. 2005; 100(2):249-55.

Bahia MGA, Melo MCC, Buono VTL. Influence of simulated clinical use on the torsional behaviour of nickel-titanium rotary endodontic instruments. Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 2006; 101(5):675-80.

Hulssman M, Schinkel I. Influence of several factors on the success or failure of removal of fractured instruments from the root canal. Endod DenTraumatol. 1999; 15(6):252– 8.

Spili P, Parashos P, Messer HH. The impact of instrument fracture on outcome of endodontic treatment. J Endod. 2005; 31(12):845–50.

Iqbal KM, Kohli RM, Kim SJ. A retrospective clinical study of incidence of root canal instrument separation in an endodontics graduate program: a PennEndo database study. J Endod. 2006; 32(11):1048 –52.

Tzanetakis NG, Kontakiotis GE, Maurikou DV, Marzelou MP. Prevalence and management of instrument fracture in the postgraduate Endodontic program at the Dental School of

Athens: A five-year retrospective clinical study. J Endod. 2008; 34(6):675–8.

Hulsmann M, Herbst U, Schafers F. Comparative study of root-canal preparation using Lightspeed and Quantec SC rotary NiTi instruments. Int Endod J. 2003; 36(11):748 –56.

Knowles KI, Hammond NB, Biggs SG, Ibarrola JL. Incidence of instrument separation using LightSpeed rotary instruments. J Endod. 2006; 32(1): 14–6.

Haikel Y, Gasser P, Allemann C. Dynamic Fracture of Hybrid Endodontic Hand Instruments Compared with Traditional Files. J Endod. 1991; 17(5):217-20.

Patiño PV, Biedma BM, Liébana CR, Cantatore G, Bahillo JG. The influence of a manual glide path on the separation rate of NiTi rotary instruments. J Endod. 2005; 31(2):114-6.

Nakagawa RK, Alves JL, Buono VT, Bahia MG. Flexibility and torsional behaviour of rotary nickel-titanium PathFile, RaCe ISO 10, Scout RaCe and stainless steel K-File hand instruments. Int Endod J. 2014; 47(3):290-7.

Schäfer E, Schulz-Bongert U, Tulus G. Comparison of hand stainless steel and nickel titanium rotary instrumentation: a clinical study. J Endod. 2004; 30(6): 432-5.

Lloyd, A. Root canal instrumentation with ProFile instruments. Endodontic Topics. 2005; 10(1) : 151-54.

Ajuz NC, Armada L, Gonçalves LS, Debelian G, Siqueira JF Jr. Glide path preparation in S-shaped canals with rotary pathfinding nickel-titanium instruments. J Endod. 2013; 39(4):534-7.

Alves VO, Bueno CE, Cunha RS, Pinheiro SL, Fontana CE, de Martin AS. Comparison among manual instruments and PathFile and Mtwo rotary instruments to create a glide path in the root canal preparation of curved canals. J Endod. 2012; 38(1):117-20.

D’Amario M, Baldi M, Petricca R, De Angelis F, El Abed RBDS, D’Arcangelo C. Evaluation of a new nickel-titanium system to create the glide path in root canal preparation of curved canals. J Endod. 2013; 39(12):1581-4.

Kerekes K, Tronstad L. Long-term results of endodontic treatment performed with a standardized technique. J Endod. 1979; 5(3):83– 90.

Sjogren U, Hagglund B, Sundqvist G, Wing K. Factors affecting the long-term results of endodontic treatment. J Endod. 1990; 16(10):498– 504.

Ruddle CJ. Broken instrument removal. The endodontic challenge. Dent Today. 2002; 2: 70-2.

Hilt BR, Cunningham CJ, Shen C, Richards

N. Torsional properties of stainless steel and nickel-titanium files after multiple autoclave sterilizations. J Endod. 2000; 26(2):76-80.

Schäfer E, Dzepina A, Danesh G. Bending properties of rotary nickel-titanium instruments. Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 2003; 96(6): 757-63.

Melo MCC, Pereira ESJ, Viana ACD, Fonseca AMA, Buono VTL, Bahia MGA. Dimensional characterization and mechanical behaviour of K3 rotary instruments. Int Endod J. 2008; 41(4):329-38.

Parashos P, Gordon I, Messer H. Factors influencing defects of rotary nickel-titanium endodontic instruments after clinical use. J Endod. 2004; 30(10):722-5.

Mandel E, Adib-Yazdi M, Benhamou LM, Lachkar T, Mesgouez C, Sobel M. Rotary Ni-Ti profiles systems for preparing curved canals in resin blocks: influence of operator on instrument breakage. Int Endod J. 1999; 32(6):436-43.

Vieira EP, França EC, Martins RC, Buono VTL, Bahia MGA. Influence of multiple clinical use on fatigue resistance of ProTaper rotary nickel- titanium instruments. Int Endod J. 2008; 41(2): 163-72.

Gambarini G Cyclic fatigue of ProFile rotary instruments after prolonged clinical use. Int Endod J. 2001; 34(5):386-9.

Downloads

Publicado

2016-06-14

Como Citar

Tavares, W. L. F., Mayor, C. D. P. S., Gonçalves, G. de S., Viana, A. C. D., & Henriques, L. C. F. (2016). Índice de fratura de instrumentos manuais de aço inoxidável e rotatórios de NiTi em clínica de pósgraduação em Endodontia. Arquivos Em Odontologia, 51(3). https://doi.org/10.7308/aodontol/2015.51.3.05

Edição

Seção

Artigos